The Font List includes internal fonts, cartridge fonts, and fonts that have
been downline loaded into memory. You can select fonts only by using
commands from the host computer; you cannot select them from the
control panel. For information about selecting fonts, refer to the Digital
ANSI-Compliant Printing Protocol Level 3 Programming Reference Manual
and the Digital ANSI-Compliant Printing Protocol Level 3 Programming
Supplement.
Use the procedure in Table 2–5 to print the font list.
Table 2–5: Printing the Font List
Operation
1. Press
to place the
On Line
printer off line.
— The On Line indicator
shuts off.
2. Press
twice.
Test/Font
— The font list prints.
3. Press
to place the
On Line
printer back on line.
— The On Line indicator
lights.
2–48 DEClaser 2100 Printer Operator's Guide
Display Reads
00 READY
06 FONT LIST
#
00 READY
00 READY