Figure 17. Terminal Modes Menu Screen - ADTRAN T200 H2TU-R Installation And Maintenance Manual

This unit includes two terminal emulation modes. The
desired terminal mode can be selected from the
Terminal Modes Screen, illustrated in Figure 17.
Additionally, pressing "CTRL" and "T" while on any
screen can toggle the two terminal modes.
The Manual Update Mode allows the user to manually
update the provisioning option screens. This mode
supports efficient print screen and log file utilities for
storage of key provisioning parameters, alarm or
performance history and current system status. "3
SPACES TO UPDATE" appears at the top of each
screen. By pressing the space bar 3 times, the screen
will be refreshed and will reflect the most current
circuit conditions and provisioning options.
CIRCUIT ID:
MANUAL UPDATE MODE:
* You can print or log screens
* No text is highlighted
* "3 SPACES TO UPDATE" appears at the top of each screen,
reminding you to press the spacebar 3 times to update the screen
* There is a delay between screen changes & updates
* After 30 min. of no interaction, a new baud rate search is begun
* Ignores input until screen is finished printing.
REAL-TIME UPDATE MODE:
* Faster of the two modes
* You cannot print screens to a log file
* Highlighting is enabled
* Recommended for daily operation
14
Press ESC to return to previous menu
TERMINAL MODES MENU
Press CTRL+T to toggle update modes on any screen.

Figure 17. Terminal Modes Menu Screen

61222026L1-5, Issue 1
The second terminal emulation mode is the Real Time
Update Mode (VT100). This mode provides real time
updating of HDSL2 circuit conditions and
provisioning options as changes occur. The
Real Time update mode is the default mode.
01/01/00 00:09:21
61222026L1-5A