Table of Contents
Advertisement
Terminal Modes
The Terminal Modes Menu
configuring the RS-232 craft interface for a manual
terminal update or a real-time terminal update.
Software Download
The Software Download screen is shown in
Procedures for upgrading the NIU3 PM are shown in
Table
5,
Software Upgrade Procedure
CIRCUIT ID: xxxxxxx
MANUAL UPDATE MODE:
* You can print or log screens
* No text is highlighted
* "Ctrl+R TO UPDATE" appears at the top of each screen, reminding
you to press the "Ctrl" and "R" keys to update the screen
* There is a delay between screen changes & updates
* After 30 min. of no interaction, a new baud rate search is begun
* Ignores input until screen is finished printing
* The <Backspace> key is disabled
REAL-TIME UPDATE MODE:
* Faster of the two modes
* You cannot print screens to a log file
* Highlighting is enabled
* Recommended for daily operation
CIRCUIT ID: xxxxxxx
24
Figure 27)
is available for
(
Figure
28.
on page 25.
"CTRL + R" TO UPDATE
Press ESC to return to previous menu
TERMINAL MODES MENU
Press CTRL+T to toggle update modes on any screen
Figure 27. Terminal Modes Menu
Press ESC to return to previous menu
Software Download
Press 1 to begin YMODEM download
Selection:
Figure 28. Software Download
Issue 5, February 2011
NOTE
Real-time terminal update is recommended for
normal operation unless screens are to be
captured or logged to a print file.
03/01/04
02:04:03
03/01/04
02:30:19
61213075L2-5E
Advertisement
Table of Contents
