Terminal Modes - ADTRAN 1181113L2 Installation And Maintenance Practice

Control Port Operation HDSL2 for General Distribution Installation and Maintenance Practice
Terminal Modes
The module used in this example includes two terminal emulation modes.
• Manual Update Mode - This mode is used to manually update the screens. This mode
supports efficient print screen and log file utilities for storage of key provisioning
parameters, alarm or performance history and current system status. The message "3
SPACES TO UPDATE" appears at the top of each screen. By pressing the spacebar three
times, the screen will be refreshed and will reflect the most current circuit conditions and
provisioning options.
• Real-Time Update Mode (VT100) - This mode provides real-time updating of HDSL2 circuit
conditions and provisioning options as changes occur. The default mode is Real-Time
Update.
The desired terminal mode can be selected from the Terminal Modes Menu, illustrated in
Figure 34. Additionally, pressing Ctrl+T while on any screen can toggle the two terminal
modes.
NOTE
The Manual Update Mode is not available on the Total Access 3000
H2TU-C.
61223HDSL2L2-5B