Cleaning And Maintenance - Lenoxx Barista Mate MF500 Manual

CLEANING AND MAINTENANCE:

NOTE: To reduce build-up of milk residue, always empty any residual milk and clean
immediately after frothing is completed. Never leave liquid in the Milk Frother
overnight
Never submerge the jug or base in water or any other liquids.
1. Do not remove the connector of whisk when cleaning the appliance, otherwise the
milk foam will be not good enough.
2. Unplug from machine and cover the silicone lid of the socket.
3. Separate the lid and the silicon ring from the jug.
4. Flush and clean the jug with warm soapy water. This should be done immediately
after each use.
5. Rinse the lid and silicone ring in warm water· Wash in soapy water if necessary.
6. Clean the jug body with a soft damp cloth.
7. Wash the whisks in warm soapy water and dry thoroughly. Store in a safe place.
8. Never use any solvents or abrasive cleaning agents, hard brushes, metal or sharp
objects to clean. Solvents are hazardous to health and harm the product's plastic
parts; abrasive cleaning agents and cleaning accessories may scratch the product's
surfaces.
NOTE: The Milk Frother, base or any of its accessories are NOT dishwasher safe.
STORAGE:
1. Unplug the Milk Frother and allow it to cool.
2. Store in its box in a cool and dry place.
3. Never store the appliance while it is still connected to mains power.
4. Never wrap cord tightly around the appliance.
5. Do not put any stress on the cord where it enters the appliance as it may cause
the cord to fray and break.