Short Cord Instructions; Before First Use - Lenoxx Barista Mate MF500 Manual

SHORT CORD INSTRUCTIONS:

a) A short power-supply cord is to be provided to reduce risks resulting from
becoming entangled in or tripping over a longer cord.
b) Extension cords are available and may be used if care is exercised in their use.
c) If an extension cord is used:
1) The marked electrical rating of the extension cord should be at least as great as
the electrical rating of the appliance;
2) If the appliance is of the grounded type, the extension cord should be a grounding
type 3-wire cord; and
3) The longer cord should be arranged so that it will not drape over the countertop
or tabletop where it can be pulled on by children or tripped over.
This appliance has a polarized plug (one blade is wider than the other), to reduce the
risk of electric shock, this plug is intended to fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug, if it still does not fit,
contact a qualified electrician.
Do not attempt to modify the plug in any way.

BEFORE FIRST USE:

• Carefully remove your Milk Frother from the box and remove any packaging
materials.
1. Place the power base on a dry, even, stable benchtop surface.
2. Completely unwind the power cord.
3. Connect the mains plug to a suitable mains power outlet socket.
4. Clean the product and frothing attachment before using it for the first time in
order to remove any manufacturing residue.
Note：Do not immerse the product in water. Ensure that the connector on the
bottom of the product remains dry at all times.
5. Fill the product with cold water up to the MAX level. Press and hold on the Power
Button on the control panel for 2 seconds to turn the unit on.
The default mode will blink on the control panel for 4 seconds, then the frothing
cycle with the cold water will begin. Allow the cycle to complete, at the end of the
cycle the unit will beep 3 times and then power off.
6. Then discard the water after heating. Repeat this process once more, make sure to
let the product cool down each time or it will fail to function until it has sufficiently
cooled down.
UNPACKING AND CHECKING THE PRODUCT:
1. Remove the product and accessories carefully from their original packaging.
2. Check whether the contents of the packaging are complete or damaged. If the
contents of the packing are incomplete or if damage is detected, please contact our
customer service on 1300 666 848.
3. Choking hazard! Keep packaging materials out of reach of young children and
dispose of packaging materials.