Advertisement
USE INSTRUCTIONS
- Connect the power lead to the power socket on the appliance. After connecting to a
power source, a "beep" sound is heard. The LED display will on.
- Press the function button to choose between the different cooking modes of the
appliance.
- After the function is selected, you can then adjust the time and temperature if
needed.
- Press the "Time / Temp" button to adjust the cooking time. Use the "+ or – " buttons
to adjust the cooking time.
- When a cooking time has been chosen, press the "Time / Temp" again to adjust the
temperature. Use the "+ or – " buttons to adjust the cooking temperature.
- When you have made your selection, press the "Start / Stop" button to begin the
cooking process.
- If the "Start / Stop" button is pressed in the middle of a cooking process, the
appliance will go into standby mode. If it is pressed again while in standby mode, the
appliance will revert to the previous function.
Time and temperature:
- After a function is selected, press the "Time / Temp" button to adjust the time.
Press the "Time / Temp" button again to adjust the temperature.
+ and –
:
- After pressing the "Time/Temp" button, press the "+ or – " button to adjust the
time or temperature.
- For time: every press has a step of 1 minute. The Max operation time is 9 hours 59
minutes.
- For temperature: every press has a step of 1 degree. The highest temperature
setting is 240℃ and the lowest is 50℃.
Keep Warm:
- When the appliance is in standby mode, pressing the "Keep Warm" button will put
the appliance into keep warm mode. The keep warm indicator will be on. Press the
keep warm button again to cancel the keep warm function. The keep warm function
will keep the appliance at 80 degrees. The keep warm temperature cannot be
adjusted.
Function:
- The appliance has 10 cooking modes. Press the "Function" button to choose
between these cooking modes- in a cycle: Slow Cook, Hot Pot, Rice, Porridge, Soup,
Grill, Deep Fry, Stir fry, Fry and Steam.
- Each press of the "Function" button chooses 1 function, and the corresponding
indicator flashes (time and temperature can be adjusted while the indicator flashes).
Advertisement
