Initialization Of Page F Data - Sony Handycam CCD-TR86 Service Manual

4. Initialization of page F data

Note 1 : Execute the initialization of page F only when the non-
volatile memory (VC-188 board IC401 EE PROM) is
replaced.
Note 2 : If the page F data has been initialized, all adjustment items
of the camera section must be executed again.
Initializing procedure:
Order Page Address
1
2 6 00
3 6 11
4 6 01
5 6 11
Works required after initialization
Order Page Address
1 6 01
2 6 00
3
Related Adjustments:
All adjustments of camera block.
Data
Turn OFF and ON the main power supply. (Preparation)
01 After setting the data 01 to the address,
press the PAUSE button.
Confirm that the data is 00.
2D After setting the data, Press the PAUSE button.
(Execution of page F data initialization. By this operation,
all the data from address 01 to EF are initialized.)
Confirm that the data is 01.
Data
00 After setting the data, Press the PAUSE button.
00 After setting the data, Press the PAUSE button. (End)
Perform the next item "5. Page F Data Modifications",
then execute all adjustment items of the camera section.
Procedure
Procedure
6-9