Using The Manual With The Qig; Step 1: Configure (Bench Calibration); Step 2: Set The Switches; Step 3: Mount The Transmitter - Emerson Rosemount 3144P Reference Manual

Model 3144P
USING THE MANUAL
WITH THE QIG
1-4
Refer to the following sections when using the QIG in correlation with the
manual.

Step 1: Configure (Bench Calibration)

See "Configure the Transmitter" on page 3-7

Step 2: Set the Switches

See "Set the Switches" on page 2-5

Step 3: Mount the Transmitter

See "Mounting and Installation" on page 2-6
Step 4: Connect the Wiring
See "Connect the Wiring and Power Up" on page 2-12
Step 5: Run a Loop Test
See "Loop Test" on page 3-22

Step 6: Safety Instrumented System

See "Safety Instrumented System (SIS)" on page C-1
Reference Manual
00809-0100-4021, Rev AA
March 2002