Major Parts Removal - Sharp MX-LCX3N Service Manual

3. Major parts removal

A. Motor (Main)
1) Remove the rear cabinet. (Refer to "2. Each unit removal")
2) Disconnect the connector.
3) Remove the screws, and remove the motor.
B. Lift motor
1) Remove the lift drive unit. (Refer to "2. Each unit removal")
2) Remove the screws, the E-ring, the bearing, and remove the
gear unit.
3) Remove the screws, and remove the lift motor.
4)
* Applying grease at maintenance
C. Paper feed solenoid
1)
2)
3)
MX-LCX3N DISASSEMBLY AND ASSEMBLY 6 – 3
Remove the ring, and remove the pulley.
A: Apply MOLYKOTE (UKOG-0062FCZZ)
B: Apply FLOIL (UKOG-0307FCZZ)
A
Remove the paper feed unit. (Refer to "2. Each unit removal")
Remove the cover.
Remove the screw, and remove the unit.
Disconnect the connector.
A
B