Sharp MX-LCX3N Service Manual page 11

5) Disconnect the connectors.
6) Remove the screws, and remove the paper feed unit.
B. Paper feed tray
1) Pull out the tray.
2) Remove the upper cabinet. (Refer to "A. Paper feed unit")
3) Remove the left front cabinet. (Refer to "A. Paper feed unit")
4) Remove the harness.
5) Remove the screws from the left and right rail sections, and
remove the tray unit from the rail.
C. Lift drive unit
1)
2)
3)
4)
MX-LCX3N DISASSEMBLY AND ASSEMBLY 6 – 2
Check that there is no paper, and lower the paper feed table to
the lower limit with the main unit simulation mode.
Remove the screws, and remove the rear cabinet.
Remove the connectors.
Remove the screws, and remove the lift drive unit.