Chapter 2 Cisco Asr 1000 Series Routers Components; Cisco Asr 1000 Series Route Processor - Cisco ASR 1000 Series Installation And Configuration Manual

Cisco ASR 1000 Series Routers Components
The Cisco ASR 1000 Series Routers contain the following components:
•
•
•
•
Throughout this document, the term slot refers to a Cisco ASR 1000 Series Router chassis slot. The
Note
Cisco ASR 1000 Series Route Processor 1, Cisco ASR 1000 Series Embedded Services Processor, and
Cisco ASR 1000 Series SPA Interface Processor (SIP), and power supplies plug into these slots. Shared
port adapters plug into SIP bays.

Cisco ASR 1000 Series Route Processor

The Cisco ASR 1000 Series Route processor is the central network clocking card and runs the network
operating system, BINOS kernel plus IOSD (IOS daemon). The Cisco ASR1000-RP1 is responsible for:
•
•
The Cisco ASR 1000-RP1 has LED status indicators, an RJ-45 plug for DTI and BITS timing reference,
and two USB ports which can be used with smart cards for secure key distribution.
Specific system tasks performed by the Cisco ASR 1000 Series Route Processor include the following:
•
•
•
•
OL-13208-03
Cisco ASR 1000 Series Route Processor, page 2-1
Cisco ASR 1000 Series Embedded Services Processors, page 2-9
Cisco ASR 1000 Series SPA Interface Processor, page 2-13
Cisco ASR 1000 Series Router Power Supplies, page 2-16
Selection of the active Cisco ASR 1000 Series Route Processor and the Cisco ASR 1000 Series
Embedded Services Processor and notification of the Cisco ASR 1000 Series SPA Interface
Processor of these events.
All the control processors communicating and performing packet processing on packets punted to it
by the Cisco ASR 1000 Series Embedded Services Processors (ESP).
Runs the router control plane, including network control packets, and connection setup
User interfaces: 10/100/1000 Management Ethernet, CON/AUX, USB
Active and standby Cisco ASR 1000 Series RP1 and Cisco ASR 1000 Series Embedded Services
Processor master and standby synchronization (Tasks include switchover from failing master to
standby.)
Code storage, management, and upgrade.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
2
C H A P T E R
2-1