Keep Warm Function - Salton JK2038 Instruction Booklet

11.The Lid should not be opened when the Kettle is hot.
12.Only grip the Kettle by the Handle as all other surfaces will be hot.
13.Return the Kettle to the Base or a heat resistant surface after use.
14.IMPORTANT: If the Kettle is accidently switched on when empty, the
thermostat will automatically cycle on and off to prevent the Kettle
from overheating. If this situation occurs unplug the Kettle
immediately and allow the Kettle to cool before refilling.
15.It is recommended that the Power Cord be disconnected from the wall
outlet when not in use.
16.DO NOT attempt to connect any other appliance to the Power Base
or tamper with the connector in any way.

KEEP WARM FUNCTION

1. Hold the Power Button for 2 seconds and the keep warm symbol
will appear on the display. Then turn the knob until you reach one of
the 7 desired 'keep warm' temperature settings between 40 - 90°C
(104 – 194°F). The power indicator light on the knob will illuminate red to
indicate the kettle is actively heating.
NOTE: The Keep Warm function will keep water at the preset
temperature for 2 hours. The kettle cannot be removed from the base or
the keep warm function will be cancelled and the display will show the
current water temperature in the kettle.
2. The Keep Warm Function can be deactivated at any time by pressing
the Power Button once.
WATER TEMPERATURE GUIDE
The following is a general guide for brewing different types of tea.
Brand and freshness of tea including each individuals taste and
preference differs.
If your tea box/container has brewing instructions, follow those as they
are probably ideal for that specific tea.
Type of Tea
Green tea
White tea
Oolong tea
Black tea
Herbal tea
Boil
Water Temperature
80°C / 176°F
90°C / 194°F
90°C / 194°F
100°C / 212°F
100°C / 212°F
100°C / 212°F
Steep Time
1-3 minutes
4-8 minutes
1-8 minutes
3-5 minutes
5-8 minutes
5