Keypad Functions Description; Power Description; Error Messages - Excell FB530 User Manual

EXCELL PRECISION CO., LTD.
"Low battery
:
power" indication

1-3 Keypad Functions Description

Loop select from the preset units
Preset weight and quantity for
weight check or quantity check
Accumulate weight or quantity
Tare to deduct the container weight
Set preset tare
Recall the totalization value, preset
value and pre-tare value
Clear the totalization value, preset
value and pre-tare value.
Zero the scale.

1-4 Power Description

Power
Power
without printer
consumption
with 1X350Ω
load cell
with printer
Low Power Alarm
Please note when the (
display, the batteries should be recharged.

When the low battery warning symbol shows up, scale is turned off automatically after
5~10 hours if it is used without backlight (1~2 hours if it is used with backlight). Then scale
must be fully recharged, before operating again.

Please recharge at once when the symbol
accuracy.
Memory power supply for FB530

When AC battery is cut off and Lead acid battery voltage is lower than 3V, the data in
RTC IC can maintain for 24 hours.

1-5 Error Messages

oL  Weight exceeds 9d of maximum capacity. (d=division)
E1  Zero value after power on is over +10% FS.
0201810X
▼6 is Range 1
Battery
Plugged in
No backlight
Single display with
backlight
Dual display with
backlight
When not in printing
While in printing
) symbol keeps flashing on the left down corner of the
shows in order to keep the weight
5
▼5 is Range 2
Go into counting mode
Press this key to sample
Press this key to confirm
Press this key to enable/disable
backlight
Press this key to print
Press this key to input number
0~9
Press this key to feed the paper
6V 4Ah Rechargeable battery
110V / 220V AC
26 mA
32 mA
40 mA
20mA
40mA
ZSME300000292