Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
Unit Weight Too Small (
When sampling, the above two symbols indications are on. Under such conditions,
the scale can still work, but may result in lower count precision.
When using 2-segment weighing mode, the above two symbol indications change to
Range 2 and Range 1 and the two symbol indications are off.
2-3-2 Check Weighing
Refer to the operation of check weighing in weighing function.
2-3-3 Totalizing
Refer to the operation of totalizing in weighing function.
Chapter 3 General Function Setting
Switch on the scale. While the scale is counting down to zero, press and hold
until
the display shows the software version number 02018. Release the
scale enters into the configuration setting mode and display F0.
press
press
press
press
key ⇒ upward key
key ⇒ downward key
key ⇒ to confirm
0201810X
Unit weight is less than 0.2 division.
)
Pcs
(0.1 d for Brazil regulation)
press
F4
F5
press
F6
F7
F8
F11
press
F12
F14
press
F0~F3, F9, F10, F13, F15 are reserved.
11
Check Weighing Configurations
RS232 and Mini Printer Output
Setting (option)
Exit Function
Internal Value Display Mode
Weight Hold Mode Setting
ID Code Setting
Print Key Function Setting
Customized Header Setting
(r n P 6, r n P 7)
key
key, the
ZSME300000292
Advertisement
Table of Contents
