Section 2: Setup; Needed For Setup; Unpacking - Grizzly T32428 Owner's Manual

This equipment presents
serious
to untrained users. Read
through this entire manual
to become familiar with the
controls and operations
before using equipment!
Wear safety glasses during
the entire setup process!
Lifting heavy machinery
or parts without proper
assistance or equipment
may result in strains, back
injuries, crushing injuries,
or property damage.
Model T32428 (Mfd. Since 11/21)

SECTION 2: SETUP

injury hazards

Needed for Setup

The following items are needed, but not included,
for the setup/assembly of this equipment.
Description
• Safety Glasses (for Each Person) .............. 1
• Tape ............................................ As Needed
• Framing Square .......................................... 1
• Machinist's Square 6" ................................. 1
• Steel Hammer ............................................ 1
• Center Punch ............................................. 1
• Hand Drill .................................................... 1
• Drill Bit ⁄ " ................................................ 1
11
32
• Another Person .......................................... 1
• Open-End Wrenches 13mm ....................... 2
• Straightedge 4' ........................................... 1

Unpacking

This equipment was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the equipment
and have resolved any issues between Grizzly or
the shipping agent. You MUST have the original
packaging to file a freight claim. It is also extremely
helpful if you need to return your equipment later.
Qty
-5-