Swing Function - Bosch Climate 5000 Series Installation Instructions Manual

7.9 Swing Function

Louver Up-Down (applicable to Wall mounted and Cassette Indoor models only)
1. Press the SWING
2. Press the SWING
swings by six degrees every time when the SWING
3. When the Up-Down auto swing mode is activated, the fan swing icon will appear on the
display.
Louver Left-Right (applicable to Wall Mounted indoor units only)
1. Press and hold the SWING
feature.
2. Press the SWING
degrees each time the Swing button is pressed
Individual Louver Function
1. Press the SWING
2. Use the or
(-0 corresponds to all four louvers).
-0
Figure 36
3. Press the SWING
Climate 5000 Series Gen 3 Wired Wall Thermostat (02.2022)
button to start the automatic swing function.
button again to stop the automatic swing function. The louver
button for 2 seconds to activate the Left-Right auto swing
button again to stop the auto swing feature. The louvers swing six
button
buttons to select the desired louver to adjust in the following sequence
-1 -3
-2
button to adjust the airfl ow direction of the selected louver.
Installation Instructions
button is pressed.
-4
| 37