Rinnai REU-VEP2730FFD-US Installation And Operation Manual page 23

4.4.2 Instructions for Outdoor
Models
You Will Need:
• Rinnai Tankless Water Heater
Supplied by Installer:
• Level
• Screws for top and bottom bracket
installation

Use appropriate screws for type of wall
construction.
Instructions:
1. Identify the installation location and confirm
that the installation will meet all required
clearances.
2. Securely screw the top and bottom brackets
into the wall, making sure the screws are flush
with the wall.
• Use any of the holes in the top and
bottom brackets.
• Use a level (placed horizontally or
vertically) to make sure the water heater
is straight. Proper operation requires the
water heater to be level.
• Make sure the securing method is
sufficient to support the weight of the water
heater. Refer to the water heater weight in
section "3.3 Specifications."
IMPORTANT
The water heater must be installed in an
upright position. DO NOT install the water
heater upside down or on its side.
Figure 14: Outdoor Models
Rinnai Tankless Water Heater Installation and Operation Manual
7.09 (180)
6.30 (160)
Ø .22X .73
5.12 (130)
(5.5X18.5)
3.15 (80)
Wall mounting
brackets
Figure 15: Outdoor Mounting Brackets
Ø.51 (13)
Ø .22x .41
(5.5x 10.5)
Ø .24x .08
(6x 2)
23