Table of Contents
Advertisement
Product
Isolation Valve
Part #: MIVK-T-LW
Dedicated Return Valve
Part #: 107000450
Cold Weather Kit
Part #: REColdKit
Leak Detection Kit
Part #: RELeakKit
Battery Backup
Part #: R-UPS350A
Thermal Bypass
Part #: 107000413
Push Button
Part #: RWMPB02
Motion Sensor
Part #: RWMMS02
14
Product Description
Isolation valves provide the ability to isolate
the water heater from the
structure's plumbing system and allow quick
and easy access to flush the heat exchanger.
Valve kit including tee, drain valve, check valve
and isolation valve to simplify set-up of a dedi-
cated recirculation line.
Electric heater, bottom pipe cover, and insu-
lation panels for use with Pipe Cover (Part #:
PCD09-SHS)
Pipe cover drain pan and float switch for use
with Pipe Cover (Part #: PCD09-SHS)
Tankless battery backup system, 500VA/ 350W
uninterrupted power supply (UPS), Hot water
usage of 1 hour per day with sufficient power
for 5-7 days.
The thermal bypass valve can be installed
between with water heaters to run recirculation
without a dedicated return line.
Mounted in a convenient location, such as a
kitchen faucet or bathroom sink, the wireless
push button works with the control•r™ Module
to operate the tankless water heater recircula-
tion system by pushing the button.
Mounted near the point of use, like a kitchen
faucet or bathroom sink, the wireless motion
sensor works with the control•r™ Module to
operate the tankless water heater recirculation
system with the detection of motion.
Rinnai Tankless Water Heater Installation and Operation Manual
Image
Advertisement
Table of Contents
