Table of Contents
Advertisement
EDITING
42
EN
Dubbing To Or From A VCR
To S connector
To AV
connector
Audio/Video
cable
(provided)
1
2
VCR
A
Yellow to VIDEO IN or OUT (Connect when
your TV/VCR has only A/V input connectors).
B
Red to AUDIO R IN or OUT
C
White to AUDIO L IN or OUT
D
Black to S-VIDEO IN or OUT (Connect when
your TV/VCR/VDR has S-VIDEO IN/OUT. In
this case, it is not necessary to connect the
yellow video cable.)
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Centre described on the sheet included in
the package for details on its availability. Make sure
to connect the end with a core filter to the camera.
The core filter reduces interference.
To use this camcoder as a player
1
Following the illustrations, connect the
camcorder and the VCR's input connectors.
2
Start playback on the camcorder. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
S Cable
(optional)
3
4
TV
pg. 23)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
pg. 15)
● To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "ON" or "OFF".
(
pg. 32, 35) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON".
(
pg. 32, 35)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". (
pg. 32, 35)
To use this camcorder as a recorder
1
Following the illustrations, connect the
camcorder and the VCR's output connectors.
2
Set "REC MODE" to "SP" or "LP". (
3
Set the camcorder's Power Switch to "PLAY".
4
Set "S/AV INPUT" to ON. (
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
● The "
" or "
A/V IN
S IN
the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The
indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The
rotating.
9
Press 8 to return to the normal playback
mode.
NOTES:
● After dubbing, set "S/AV INPUT" back to "OFF".
● Analogue signals can be converted to digital
signals with this procedure.
• It is also possible to dub from another
camcorder.
pg. 33)
pg. 32)
" indication appears on
indication stops
Advertisement
Table of Contents
