Grip Adjustment; Viewfinder Adjustment; Brightness Adjustment Of The Display; Tripod Mounting - JVC GR-D650AA Instructions Manual

Grip Adjustment

1
Adjust the velcro strip.
2
Pass your right hand
through the loop and
grasp the grip.
3
Adjust your thumb
and fingers through the
grip to easily operate the
Recording Start/Stop
Button, Power Switch
and Power Zoom Lever.
Be sure to fasten the
velcro strip to your preference.

Viewfinder Adjustment

1
Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Example:
Dioptre Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
GETTING STARTED
Brightness Adjustment Of The
Display
1
Set the Power Switch
to "REC" or "PLAY" while
pressing down the Lock
Button located on the
switch.
If you are in Recording
mode, set the recording
mode to "M". ( pg. 16)
2
Open the LCD monitor
fully. ( pg. 20)
● To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
"PRIORITY" to "FINDER"
( , 34)
pg. 32 .
3
Press MENU. The Menu Screen appears.
If you are in Playback mode, please proceed to
step 5.
4
Press , , or
and press SET. The DISPLAY Menu appears.
5
Press , , or
and press SET. The Menu Screen closes and
the brightness control MENU appears.
6
Press or until the appropriate
brightness is reached and press SET or
7
Press MENU. The Menu screen closes.

Tripod Mounting

To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
● Some tripods are not
equipped with studs.
17
EN
MENU
BRIGHT
to select "DISPLAY",
to select "BRIGHT",
.