Table of Contents
Advertisement
MENUS FOR DETAILED ADJUSTMENT
34
EN
GAIN UP
AGC
OFF: Allows you to shoot dark scenes with no
picture brightness adjustment.
[AGC]: The overall appearance may be grainy,
but the image is bright.
AUTO
: The shutter speed is automatically
adjusted. Shooting a subject in low or poor
lighting at slow shutter speed provides a brighter
image than in the AGC mode, but the subject's
movements are not smooth or natural. The
overall appearance may be grainy. While the
shutter speed is being automatically adjusted,
"
" is displayed.
WIND CUT
[OFF]: Disengages the function.
ON
: Helps cut down on noise created by
wind. The "
" indicator appears. The quality of
the sound will change. This is normal.
16:9
TV
To enable your tv to display images in 16:9 wide
mode, set the tv screen size correctly.
[4:3TV]: For TV with an aspect ratio of 4:3
16:9TV: For TV with an aspect ratio of 16:9
The
functions which are set when the
"SYSTEM"
Power Switch is set to "REC" are also applied
when the Power switch is set to "PLAY".
[ ] = Factory-preset.
MELODY
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is
performed. It also activates the shutter sound
effect. (
pg. 37)
CAM RESET
[RETURN]: Does not reset all settings to the
factory-preset.
EXECUTE: Resets all settings to the factory-
preset.
PRIORITY
[LCD]: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
SYSTEM
REMOTE
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
● The menu settings can be changed only when the
Power Switch is set to "REC".
● The DISPLAY settings except "BRIGHT" and
"LANGUAGE" are effective only for shooting.
[ ] = Factory-preset
BRIGHT
pg. 17, "Brightness Adjustment Of The
Display"
CLOCK ADJ.
pg. 16, "Date/Time Settings"
LANGUAGE
[ENGLISH] / FRANÇAIS / DEUTSCH /
ESPAÑOL / ITALIANO / NEDERLANDS /
PORTUGUÊS / РУССКИЙ / POLSKI /
ČEŠTINA
The language setting can be changed.
(
pg. 16)
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
ON SCREEN
LCD: Keeps the camcorder's display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder's display
appear on screen when the camcorder is
connected to a TV.
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. (
DEMO MODE
DEMO
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Wipe/Fader and Effect, etc., and can be used to
confirm how these functions operate.
Demonstration starts in the following cases:
● When the Menu Screen is closed after "DEMO
MODE" is turned "ON".
● With "DEMO MODE" set to "ON", if there is no
operation for about 3 minutes after the Power
"REC"
Switch is set to
DISPLAY
pg. 22)
.
Advertisement
Table of Contents
