Table of Contents
Advertisement
Complete the information below, and keep it for reference.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number
2
Overview
This document describes the hardware installation and software configuration steps necessary to install your Cisco 1760
modular access router with its complement of WAN interface cards (WICs) and voice interface cards (VICs). Additional
documentation can be found on Cisco.com.
Product Serial Number Location
The serial number label for Cisco 1760 router is located on the rear of the chassis, in the lower right-hand corner.
3
Parts List
Your router package should include the following items:
• One Cisco 1760 modular access router
• One blue RJ-45-to-DB-9 console cable
• One DB-25-to-DB-9 adapter
• One black power supply cord
• Cable guide
• Rack-mounting brackets
• Product documentation
4
Mounting the Router in a Rack
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure
that the system remains stable. The following guidelines are provided to ensure your safety.
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component
at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.
The rack-mounting brackets supplied with the router can be attached to a 19- or 24-inch rack. Figure 1 shows the bracket
mounting points that attach to the rack.
3
Advertisement
Table of Contents
