Table of Contents
Advertisement
Washing sequence
Wash timer
(To set to below 2 minute,
Inlet selector
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
SPIN
WASH TIMER
Wash
1 Fill selection
(1)
Set fill selection to
(2 )
Adjust water level rod to a position as needed.
2
Fill water and add solved powder detergent until
water reaches a suitable level.
It begin to wash to dispense detergent uniformly.
3
Put in the wash load, and supplement water
as necessary.
4
Select the current
Select the strength of the current according to
the laundries. (Figure 3)
5
Select the washing time
Select the washing time according to the
laundries. (Figure 4)
6
After washing the buzzer will ring,
set the
WASH SELECTOR
.(Figure 5)
Wash selector
(standard current,
strong current)
STRONG
OFF
STANDARD
WASH SELECTOR
(
Wash side
.
Figure 1
(
)
Figure 2
at
DRAIN
8
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
DRAIN
SPIN TIMER
)
Figure 1
STRONG
Figure 2
STANDARD
DRAIN
WASH SELECTOR
Figure 3
OFF
WASH TIMER
STRONG
Figure 4
DRAIN
WASH SELECTOR
Figure 5
Advertisement
Table of Contents
