Connection To A Tv With Hdmi Jack - Samsung DVD-V9700 Instruction Manual

Connection to a TV with HDMI Jack

1
Using the HDMI-HDMI cable connect the HDMI
OUT terminal on the rear of the DVD player to the
HDMI IN terminal of your
2
Press the input selector on your
control until the HDMI signal from the DVD player
appears on your TV screen.
HDMI VIDEO Specifications
When you press the HDMI button on the front panel, 480p, 720p, 1080i are selected in
The first press of the
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI cable is plugged into TV, the DVD player's output is set to HDMI within 10 seconds.
- If you set the HDMI output resolution 720p or 1080i, HDMI output provides better picture quality.
- For better picture quality, set the HDMI output resolution to 720p or 1080i.
●
HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single
connector. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid
picture on a TV having an HDMI input jack.
●
HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
- Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the
screen.
●
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to
a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss.
C
O N N E C T I O N S
TV.
TV remote
HDMI button on the front panel brings up the current resolution.
ENG-18
HDMI Cable
order.