Table of Contents
Advertisement
Notes
For safety reasons, the washing
■
machine door remains locked when
the water level or temperature is
high, or while the drum is rotating,
and it is not possible to add laundry
during this time.
To continue the programme, select
the Start/Reload button.
Do not leave door open for
■
a prolonged period – water could
run out of the laundry.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press Start/Reload.
1.
Select the other programme.
2.
Press Start/Reload . The new
3.
programme starts from the
beginning.
Cancel the programme
For programmes at high temperature:
Select Start/Reload.
1.
To cool down laundry: Select
2.
O Rinse.
Select Start/Reload.
3.
For programmes at low temperature:
Select Start/Reload.
1.
Select 0 [ Spin/Drain (if only
2.
a drained cycle is required: set rpm
(spin speed) to - - -).
Select Start/Reload.
3.
Operating the appliance
Programme end during rinse
hold
- - - appears in the display panel and the
Start/Reload button indicator light
flashes.
To end the programme:
Select 0 [ Spin/Drain (if only
1.
a drained cycle is required: set rpm
(spin speed) to - - -).
Select Start/Reload.
2.
Programme end
End appears in the display panel.
If the 9 symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Add less detergent for the next
Note:
washing cycle with the same load.
en
21
Advertisement
Table of Contents
