Detergent Solution Pump Blocked; The Drain Hose At The Siphon Is Blocked - Bosch WLK24261BY Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Cleaning and maintenance
en
Detergent solution pump
blocked
:
Warning
Risk of scalding!
Washing water is hot when washing at
high temperatures. If you come into
contact with the hot detergent solution,
you may be scalded.
Allow the washing water to cool down.
Turn off the water tap so that no
1.
more water can flow in and has to be
drained via the detergent solution
pump.
Turn the programme selector to Off.
2.
Remove the mains plug.
Open the service flap.
3.
Take the drainage hose out of the
4.
holder.
Remove cover flap, drain water into
5.
a suitable receptacle. Press on the
cover flap and insert the drainage
hose into the holder.
Residual water may run out.
Note:
26
Carefully unscrew the pump cover.
6.
Clean the interior, pump cover
thread and pump housing. The
impeller in the detergent solution
pump must be able to rotate.
Reinsert and screw on the pump
7.
cover. Handle should be vertical.
Close the service flap. If required,
8.
engage disengaged service flap
beforehand.
To prevent unused detergent
Note:
from flowing into the outlet during the
next wash: Pour 1 litre of water into
dispenser II and start the 0 [ Spin/
Drain programme: (if only a drained
cycle is required: set rpm (spin speed)
to - - -).
The drain hose at the siphon
is blocked
Turn the programme selector to Off.
1.
Remove the mains plug.
Loosen hose clip and carefully
2.
remove drainage hose.
Residual water may run out.
Clean the drain hose and siphon
3.
connecting piece.
Reattach the drain hose and secure
4.
the connection point using the hose
clamp.

Advertisement

Table of Contents
loading

Table of Contents