Table of Contents
Advertisement
CX-JV1
Remote control
Buttons with the same or similar names as the main unit
basically have the same function.
1 POWER
2 1-0/10, +10
CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.
The numbered buttons take on these functions below when pressed
with SHIFT held down
:
EDIT/CHECK
Enters AI Edit Recording or Programed Edit Recording
mode when pressed in stop mode.
BAND
Selects Tuner function and the radio band.
TAPE A/B
SPECTRUM
Changes the spectrum analyzer display.
TUNER MODE
Switches between stereo or monaural FM reception.
Setting the clock
Use the remote.
1 Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.
2 Press r or t repeatedly until "CLOCK
SET" appears in the display and then press
ENTER.
3 Press r or t repeatedly to set the hour
and then press ENTER.
4 Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
•MULTI JOG is also available in place of r or t.
To display the time
Press DISPLAY. The time will be displayed for 6 seconds.
Tip:
"AM 12:00" indicates midnight and "PM 12:00" noon.
If "- -:- -" appears when the unit is turned off
There has been a power interruption. Reset the clock.
8
KARAOKE
Selects a Multiplex mode.
PLAY MODE
CD: selects Shuffle, Programmed playback, etc.
REPEAT
Enters CD repeat playback mode.
SLEEP
Switches the sleep-timer on/off and selects the duration.
SOUND
Selects BASS or TREBLE setting mode
ECHO
Adjusts the echo level for CD function.
3 r, t/PREV, NEXT/DIGEST, ZOOM
CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
VCD: goes to the next/previous page or scene.
DIGEST: Activates the Digest playback function when
playback a VCD.
ZOOM: Enlarge VCD picture during pause.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.
4 ALBUM -, +/KEY CONTROL 7, &
MP3: selects a previous album or a succeeding album.
CD: adjust the playback sound key for CD function
5 PBC
Manually turns the PBC function on and off for a PBC
disc.
MARK
Marks a desired point when playing back a VCD.
ON SCREEN
Displays disc information such as the elapsed playback
time on the TV screen.
6 CLOCK/TIMER/SET
Enters timer setting mode.
CLOCK/TIMER/SELECT
Selects timer playback, timer recording or timer off.
S l t ti
l b k ti
7 DISPLAY
8 SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
9 FUNCTION
Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).
0 DISC SKIP
Select a disc.
! c/d
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
s
CD and Tape: stops playback.
f,g
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
CD and Tape: pauses playback.
@ SLOW
Plays back a VCD slowly while held down.
# VOLUME +, -
Adjusts the volume.
$ ENTER
CLEAR
Clears a track of the CD programed playback and a Radio
preset station.
Advertisement
Table of Contents
