IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.
Cleaning the spray arms
The spray arms should be cleaned regularly, to prevent hard water
deposits from clogging the spray arm jets and bearings.
o To remove the upper spray arm, unscrew the nut and take out
the washer that sits on top of the spray arm.
o Gently pull upwards to remove the lower spray arm.
o Wash the spray arms in warm, soapy water and use a soft brush
to clean the jets.
o Rinse the spray arms thoroughly and then reassemble the spray
arms back in their original positions.
Cleaning the control panel
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
o Wipe over the control panel using a brand new damp cloth with
warm water.
29