Trouble-Shooting Answer To Question; Names Of The Parts - Haier 50FREE-3 User Manual

Trouble-shooting answer to question

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance department or after-sale service department of our company. Do not repair it by yourself.
Phenomena The reason
The drainage cannot work, or is too slow.
Is the drain hose put down?
The digitron displays E1. Is the drain hose blocked?
It stops running in midway. The digitron
The top lid is not closed.
displays E2.
Are the laundries put slantingly?
The safety switch acts, and the
Is the machine slanting?
spinning cannot work. The
digitron displays E3.
Is the water tap opened, or is there water
The water filling does not work, or is supply failure?
slow, the digital displays E4. Is the water inlet valve blocked?
Is the water pressure too low?
The water level sensor is bad.
The digitron displays F1.
Is there power failure?
Is the power plug inserted tightly?
Not wash
Is the water level reached preset position?
The machine does
not act
Is the power plug inserted tightly?
Is the top lid closed reliably?
Not spin
Are the laundries set flat?
Is the machine slanting?
There's abnormal sound
Are the laundries put slantingly in spinning?
inside the machine
Are there any foreign materials?
Is the jointer of water
The water tap leaks
inlet hose loose or awry?
Common phenomena
Phenomena
The spinning is intermittent when it starts. Balance the laundries to avoid slanting.
The program is setting the drain time , certain
Select spin program, but it does not work.
period is needed before it starts spinning.
The pulsator pauses during water
It is to avoid splashing during water inlet
inlet in wash and rinse.
There may be some water flowing out of the It is the water remained performance inspection
drain hose in the first use of the machine. by the factory.
How to settle
Put down the drain hose. Open and close the
top lid once.
Clean the foreign material. Open and close
The top Lid Once.
Close the top lid.
Reorder the laundries. Close the top lid.
The machine will start running after 10
seconds of being placed horizontally.
Open the water tap. Open and close
the top lid once.
Clean the water inlet valve then open
and close the top lid once.
Open and close the top lid once.
Please contact the after-sales
service department.
Please use it when there's power supply.
Insert the power plug tightly.
Fill water to the preset position.
Insert the power plug tightly.
Close the top lid.
Set the laundries flat.
Adjust the machine to be even
Reorder the laundries and close the top lid.
Remove the foreign materials.
Fasten the jointer properly.
Explanation
16
Names of the par ts
Top lid
Control
panel seat
Lint filter
Inner tub
Pulsator
Control
panelfilm
Cabinet
Adjustable foot
Adjustable foot
film
Meaning and description of the symbols
Warning sign
Contents marked with that symbol are related to the
safety of the product and the personal safety of the users.
Please operate in strict conformity to the contents.
Forbidden sign
Contents marked with that symbol are actions forbidden
to perform. Performing of those action may result in
damage of the machine or influence the personal safety of
the users.
Water-absorption
Water inlet valve
gasket
Inner cover
components
Out tub
cover
Hook
Power
cord
Drain
Back
hose
cover
Base
Fixed foot(3 pcs)
1
Handle