Section 7: Connect The Water Supply - Zenith HydroTap G5 Home Series Quick Start Installation Manual

Command centre boiling, boiling / ambient models
Table of Contents

Advertisement

Valves and fittings must be sealed with PTFE
!
tape if compression seals are not included.
Note Mixer tap installations also use a 'Tee piece' as part of the water supply
plumbing connections, see the Tap installation instructions supplied with the
Mixer Tap to connect the water supply if using the mixer tap option.
Note correct strainer orientation.
Isolation valve
(not supplied)
Quick Start Installation Guide
12
806836NZ v1.02 02.22 G5 B BA Quick Start Guide

SECTION 7: Connect the water supply

Male - Female
adaptor
(supplied)
Strainer
(supplied)
Connect together
Connect to
Command Centre
see page 17,18
Connect to
Command Centre
see page 17,18

Advertisement

Table of Contents
loading

Table of Contents