Panasonic CS-A73KR Service Manual page 119

HELPFUL INFORMATION
Auto Operation and Test Run Button
POWER SLEEP TIMER
ECONOMY
POWERFUL
Auto Operation Button
(If remote control fails to function or misplaced)
1
Press the Auto Operation Button for automatic operation. But the
temperature cannot be adjusted.
*
2
To cancel, press once more.
Test Run Button
For installation or servicing purpose only.
• To switch off the beep (signal received) sound, press the Auto Operation
Button at the indoor unit for 10 seconds or longer.
Repeat the above if you want to switch on the beep sound.
Auto Restart Control
• If power is resumed after a power failure, the operation will restart
automatically after 3 - 5
• Operation will be automatically restart under the previous operation
mode and airflow direction when power is resumed as the operation is
not stopped by remote control.
Timer Setting
• When power failure occurs, the timer setting is cancelled. Once power
is resumed, reset the timer.
Thunder and Lightning
• Whenever there is lightning, stop operation to
protect the air conditioner.
Turn the power switch to OFF, then unplugged the
power supply plug.
The power LED on indoor unit blinks until the operation mode
is selected automatically.
1 / minutes.
2