6
Touchscreen Display
The user can control the operation of the printer with the control panel, for example:
•
Issuing, interrupting, continuing and canceling print jobs,
•
Starting labelling cycles when operating the printer with applicator,
•
Setting printing parameters, e.g. heat level of the printhead, print speed, interface configuration, language and
time of day ( Configuration Manual),
•
Control stand-alone operation with a memory module ( Configuration Manual),
•
Update the firmware ( Configuration Manual).
Many functions and settings can also be controlled by software applications or by direct programming with a
computer using the printer's own commands. Programming Manual for details.
Settings made on the touchscreen display make the basic settings of the label printer.
i
Note!
It is advantageous, whenever possible, to make adaptations to various print jobs in the software.
6.1
Start Screen
After switching on
Figure 6
Start screen
The touchscreen display is operated directly by touch:
•
To open a menu or select a menu item lightly touch the corresponding symbol.
•
To scroll in lists slide finger up or down on the display.
Open the menu
Interrupt the print job
Continue the print job
with applicator:
with print job:
Alternately printing and applying a label
without print job:
Starting an applicator action
Table 2
Symbols on the start screen
i
Note!
Inactive symbols are shaded.
14
During printing
In pause state
Repeat the last printed label
Cancel all print jobs
Feed a blank label
After print job
User Manual