Table of Contents
Advertisement
Special Conditions for Marine Applications
Some products are approved for marine (shipboard) applications. To verify marine
approval certification for a product, visit ni.com/product-certifications, search by
model number, and click the appropriate link.
Notice
install the product in a shielded enclosure with shielded and/or filtered
power and input/output ports. In addition, take precautions when
designing, selecting, and installing measurement probes and cables to
ensure that the desired EMC performance is attained.
Physical Characteristics
If you need to clean the module, wipe it with a dry towel.
Tip
For two-dimensional drawings and three-dimensional models of the C
Series module and connectors, visit
module number.
Screw-terminal wiring
Gauge
Wire strip length
Temperature rating
Torque for screw terminals 0.22 N · m to 0.25 N · m (1.95 lb · in. to 2.21 lb · in.)
Wires per screw terminal
Ferrules
Connector securement
Securement type
8
ni.com
In order to meet the EMC requirements for marine applications,
2
0.05 mm
to 1.5 mm
6 mm (0.24 in.) of insulation stripped from the end
90 °C, minimum
One wire per screw terminal; two wires per screw terminal using a
2-wire ferrule
2
0.25 mm
to 1.5 mm
ni.com/dimensions
2
(30 AWG to 14 AWG) copper conductor wire
2
Screw flanges provided
NI-9269 Getting Started
and search by
Advertisement
Table of Contents
