Ce Compliance; Electromagnetic Compatibility Guidelines - National Instruments NI-9269 Getting Started

UL 61010-1, CSA C22.2 No. 61010-1
■
EN 60079-0, EN 60079-7
■
IEC 60079-0, IEC 60079-7
■
UL 60079-0, UL 60079-7
■
CSA C22.2 No. 60079-0, CSA C22.2 No. 60079-7
■
Note
For safety certifications, refer to the product label or the
Certifications and Declarations

CE Compliance

This product meets the essential requirements of applicable European Directives, as
follows:
2014/35/EU; Low-Voltage Directive (safety)
■
2014/30/EU; Electromagnetic Compatibility Directive (EMC)
■
2014/34/EU; Potentially Explosive Atmospheres (ATEX)
■

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits
for electromagnetic compatibility (EMC) stated in the product specifications. These
requirements and limits provide reasonable protection against harmful interference
when the product is operated in the intended operational electromagnetic
environment.
This product is intended for use in industrial locations. However, harmful
interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or
commercial areas. To minimize interference with radio and television reception and
prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved
by National Instruments could void your authority to operate it under your local
regulatory rules.
section.
NI-9269 Getting Started
Product
© National Instruments
7