Table of Contents
Advertisement
Chapter 3
OVERVIEW
TERMINAL MENU STRUCTURE
61200186L2-1
Operation
You can control and configure the Octal BRI/U Module from a variety of
sources, including the following:
•
The ATLAS front panel, providing minimal configuration and status
support (ATLAS 800 systems only)
•
The terminal menus, allowing detailed configuration, status, and diag-
nostics
•
SNMP, primarily for reporting alarm conditions and system status
The remainder of this section describes the menu items presented when
managing the Octal BRI/U Module via the terminal menu.
Access the terminal menu using either a VT-100 terminal attached to the
ATLAS Base Unit's control port or a Telnet session established through the
Base Unit's Ethernet port. The ATLAS User Manual provides detailed
instructions on the operation of each of these management approaches.
To edit items in the terminal menu, you must have the appropriate
password level. Each menu description in this section indicates the
password level required for write and read access. See "Access
Passwords" in the ATLAS User Manual for detailed information
on working with passwords. Security level 0 users can view and
edit every available field. Security level 5 users can view any field
but cannot edit.
ATLAS uses a hierarchical menu structure to provide access to all of its fea-
tures. The top-most menu level leads to submenus which are grouped by
functionality. All menu items display in the terminal window. To access the
Octal BRI/U Module, activate the M
describe the menu items for the M
Refer to the ATLAS User Manual for detailed instructions on
navigating through the terminal menu.
Octal BRI/U Module User Manual
menu. The following sections
ODULES
menu.
ODULES
3-1
Advertisement
Table of Contents
