Furuno RD-30 Installation Manual page 8

Flush mounting
There are two types of flush mount kits, F type and S type. For details, see
the outline drawings at the back of this manual.
F type
Flush mount kit F (Type: OP20-29, Code No.: 000-041-405)
No. Name
1 Cosmetic Panel
2 + Tapping Screw
3 Hex Bolt
4 Spring Washer
1. Make a cutout of 183 X 92 mm.
2. Attach the cosmetic panel (supplied) to the display unit with hex bolts
(M6X12, supplied) and spring washers (M6, supplied).
3. Fix the display unit to the mounting location with four tapping screws
(5X20, supplied).
S type
Flush mount kit S (Type: OP20-17, Code No.: 000-040-720)
No. Name
1 Fixing Metal
2 Wing Bolt
3 Hex Bolt
4 Wing Nut
5 Spring Washer
1. Make a cutout of 167 X 92 mm.
2. Attach two fixing metals (supplied) to the display unit with hex bolts
(M6X12, supplied) and spring washers (M6, supplied).
3. Screw four wing bolts (supplied) into wing nuts (supplied).
4. Fasten the display unit to the mounting location with four sets of wing
bolts and nuts assembled at step 3.
2
Type
20-016-1051
5x20 SUS304
M6x12 SUS304 000-862-127
M6 SUS304
Type
20-007-2401
M4x30 YBSC2
MBN12
M6x12 SUS304 000-862-127
M4 YBSC2
MBN12
M6 SUS304
Code No. Qty
100-251-370
000-802-840
000-864-260
Code No. Qty
100-183-190
000-804-799
000-863-306
000-864-260
Remarks
1
4
2
2
Remarks
2
4
2
4
2