Table of Contents
Advertisement
LE100/LE200
THE LE SERIES - OVERVIEW
There are two models in the LE range: one based on a 12" driver, the other on a 15" driver. Both
models are 8 ohms impedance. The basic characteristics of the two models are summarised
below (full specifications at "LE Series Specifications" on page 1):
Model
LF driver (dia.)
LE100
12" (300 mm)
LE200
15" (380 mm)
* AES power ratings
LE100
NL4 (handles)
The LE100 is designed to be driven by a full-range amplifier. It has an internal passive crossover
at a frequency of 1.6 kHz. The LE100 is fitted with five paralleled NL4 type connectors: two at
the front (facing the performer), one at each end recessed in the handles, and one in the base
(for use when it is pole-mounted).
LE200
The LE200 may either be bi-amped or driven by a single full-range amplifier. For full-range use,
it uses an internal crossover at a frequency of 1.2 kHz. The LE200 is fitted with four paralleled
NL4 type connectors: two at the front (facing the performer) and one at each end.
6
USER GUIDE
HF driver (dia.)
LF -3 dB point
1" (25 mm)
78 Hz
1.4" (35 mm)
68 Hz
Power rating*
300 W
400 W
NL4 (base)
LE100/LE200 User Guide V1.0
Advertisement
Table of Contents
