Table of Contents
Advertisement
6
Push the lock lever (L) back into its locked position
(away from you).
7
Set the process unit into the machine by aligning the
pins (N) on both sides of the process unit with the
guides inside the machine, and then slide the process
unit into the machine until it stops.
8
Close the front cover and top cover.
Turning the Machine on
1
Connect the power cord.
2
Turn the power switch to the machine on ( | ).
The machine will begin replenishing the toner. Wait
until it has completed that operation (approximately
15 minutes).
Once the toner has been replenished, Ready to
copy or Ready to send will appear on the message
display and the Start key will light.
(L)
(N)
Installation
(N)
1-5
Advertisement
Table of Contents
