Advertisement
MLD723048, MLD723042, MLD663048, MLD663042 - INSTRUCTIONS
STEP 4A: Snap the Interior Leg Cover(F) into Back Support(C) and Front Support(D) using a rubber mallet.
NOTE: Interior Leg Cover is installed on the side with the modesty holes.
STEP 4B: Snap the Exterior Leg Cover(E) into Back Support(C) and Front Support(D) using a rubber mallet.
D
STEP 5: CHOOSE THE ORIENTATION FOR YOUR L-DESK (LEFT RETURN or RIGHT RETURN).
THE FOLLOWING STEPS INCLUDE BOTH RIGHT AND LEFT ORIENTATIONS.
FOR STEP 6A, USE THE TEMPLATE INCLUDED WITH INSTRUCTIONS.
STEP 6A: Place the Long Table Top(K) on a clean flat surface with desired table finish face down. Then align your template as shown
below for the Corner Leg placement. Mark the coordinating points.
STEP 6B: Attach Corner Leg(G) using 3 Screws(M). See Figure 2.
NOTE:
Edges of template
align with edges of table.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Modesty Holes
F
C
NOTE : PRODUCT IS REVERSIBLE.
Hardware placement is critical.
For a Right Return
C
E
D
M
Figure 2
K
For a Left Return
G
M
Advertisement
