Retrieving Map Data Into Nmt; Using The Map Tool With Fail Analysis; Using The Map Tool To Analyze Traffic Levels - Cisco OL-10426-01 User Manual

Retrieving Map Data Into NMT

Retrieving Map Data Into NMT
Once map data has been saved in the map, that data can be imported into NMT. To do this, select
Import<Map Data from the NMT File Menu
Figure 8-17 NMT File Menu (Import Map Data Screen)

Using the Map Tool with Fail Analysis

After performing a failure analysis, click Update in the map window menu bar, and select Update Map.
Any site that did not reroute a connection for any of the link failures turns red.

Using the Map Tool to Analyze Traffic Levels

Click the Options menu and select Thresholds. The Thresholds dialog box contains two sliding bars
(Critical and Warning) that allow you to define critical and warning as a percent of total bandwidth. By
sliding the bar, you establish the threshold at which the amount of traffic is considered excessive
(critical) or close to excessive (warning). The NMT displays excessive traffic in red, close to excessive
traffic in yellow, and all other traffic in green.
Cisco WAN Modeling Tools Guide
8-14
(Figure 8-17).
Chapter 8 NMT Map
OL-10426-01, Rev. A0