Chapter 4 Configuration Table And Field - Cisco OL-10426-01 User Manual

Chapter 4 Configuration Tables and Fields
Table 4-1
Field Defaults Notes
Site Type Switch M/H
SwRel O
PC Blank P
Red Y P
Cab T1 P
Power A P/H
DFM N O
S/R P O
FrFac 1.14 O
Bundle 24 O
Modem% 0 E
OL-10426-01, Rev. A0
.Site Table (continued)
Description and Comments
Function of platform at the site.
Can be a switch, feeder,
controller or a stand alone unit.
Software release of the
switch(es) at this site. If blank,
this field defaults to the global
value defined in the Model
Settings.
Processor card. If Blank, use the
latest.
Redundancy. Y—site has
redundant components. N—site
does not have redundant
components.
Cabinet. Specifies cabinet type
(T1—American or Far Eastern;
E1—European).
Power supply.
Data Frame Multiplexing.
Y—site uses DFM. N—site does
not use DFM. If a data
connection terminating at this
site has a DFM setting of Y, it
takes precedence over the site
setting.
Save/Restore. Y—site uses
save/restore configuration
software. N—site does not use
save/restore configuration
software.
Frame Relay Factor. Multiplier to
account for frame overhead on
the IPX Mux Bus. (The 1.14
default is an IPX legacy setting.)
Maximum number of
connections that can be routed
simultaneously. Default is 32;
choose between 1 and 29.
Percentage of modem traffic on
voice connections originating at
this site.
DBF CET
STYPE *
SW_REL *
NPC *
From card table.
Default value used
until Release 9.1.
RED
CABINET
AC_DC
DFM
S_R
FR_FAC
BUNDLE
MODEM_P
CT
Cisco WAN Modeling Tools Guide
Sites Table
TPI
Restrictions imposed
on links
4-3