Function Key Layout; Program Mode - Sharper Image LM516 Instructions Manual

The image below shows the eight function keys used in the programming and
operation of the Weather Center.
The program mode is laid out in a manner that allows you to program each
function separately, or you can follow the instructions entirely to program the
Weather Center. Complete programming is usually done for the initial setup and
will require you to skip step 1 of each programming section. The programming
mode can be exited at any time by pressing the CH button or waiting for the
16-second time-out.
Setting Time and Date
1. If starting from the normal mode, press and release the SET key.
2. The hour will flash. Use + or - keys to select the current hour (AM or PM).
3. Press SET to advance to the minute. The minute will flash. Use + or - to select
the current minute.
4. Press SET to advance to the 12/24 setting. "12" will flash. Use + or - to select
either 12-hour (AM/PM) or 24-hour (military) time format.
5. Press SET to advance to the year setting. The year will flash. Use + or - to
select the current year.
6. Press SET to advance to the month setting. The month will flash. Use + or - to
select the current month.
7. Press SET to advance to the date setting. The date will flash. Use + or - to
select the current date. Press SET to advance to the location setting.
The WWVB signal will override any manually set time and date information. The
time will be based on the time zone selected.

Function Key Layout

Program Mode

9