Sharper Image LM516 Instructions Manual page 10

Setting City Location
1. If starting from the normal mode, press SET seven times.
2. The country location will flash (USA default). Press + or - to select the country
(USA = United States, CAN = Canada, MEX = Mexico).
3. Press SET to advance to the state setting (USA only) or the city location
(Canada or Mexico). (Skip to step four if Mexico or Canada is selected.) The
state will flash. Use + or - to select state.
4. Press SET to advance to the city setting. The city will flash. Use + or - to select
the city closest to your location (abbreviated by airport code, if applicable).
Press SET to advance to the time zone setting.
The following list of city locations is entered in the database. The choices are
based first on state capitals, then nearby locations based on population and differ-
ence of latitude and longitude. There are cases where your city may be closer to
a city in a nearby state rather than your state.
Program Mode
10