Features And Operations - Sharper Image LM516 Instructions Manual

7. Press SET to advance to the storm warning alarm on/off setting. The storm
warning on or off setting will flash (OFF default). Press + or - to select whether
or not the storm warning alarm is activated. Press SET to advance to the LCD
setting.
LCD Contrast
1. If starting from the normal mode, press SET 18 times.
2. The LCD contrast setting will flash (4 is the default). Press + or - to select the
contrast level desired (from 1 to 8).
3. Press SET to advance to the LI setting. The LI setting will flash (ON default).
Press + or - to select ON or OFF. Press SET to exit the programming mode.
(The LI setting does not affect the function of the Weather Center and is pre-
sent only for future use.)
Sunrise/set and Moonrise/set Calculation
The Weather Center will calculate the sunrise/set moonrise/set each day based on
the location entered through the programming mode.
Calculating Daylight Hours and Minutes
To calculate daylight hours and minutes, press and release the SUN/MOON key.
In place of the sunrise/sunset time will be the number of daylight hours and min-
utes. Press SUN/MOON to view the sunrise/sunset time again.
View Different Location/Time for Sunrise/set and Moonrise/set
If no buttons are pressed in 30 seconds during this selection, the Weather Center
will revert to the normal mode. Alternatively, you may press the CH key to revert
to the normal mode.
1. Press and hold SUN/MOON for at least two seconds. The selected country will
flash.
2. Press + or - to select the desired country. Press SET to advance to the state
selection (or city if Canada or Mexico is selected).
3. The state will flash. Press + or - to select the state.
4. Press SET to advance to the city selection. The city name flashes. Press + or -
to select the city.
5. Press SET to advance to the year setting. The current year flashes. Press + or -
to select the year desired.
6. Press SET to advance to the month setting. The current month flashes. Press +
or - to select the month desired.
Settings

Features and Operations

14