Download Print this page

Before You Begin - Kohler K-8688X Installation And Care Manual

One-piece toilet

Advertisement

Important Information
IMPORTANT NOTICE TO INSTALLERS!: Please leave these instructions for
the consumer. They contain important information.
In addition to installation procedures, this manual contains important care and
cleaning. Please retain for future reference.
NOTE: Floor flange kit is not be provided.
NOTE: The toilet pictured in the installation steps may differ from the model
being installed.
ข้ อ สุำ � คุั ญ
ข้ อ ส่ า คุั ญ ถูึ ง ผู ้ ต ิ ด้ ตั � ง ! คุู ่ มี ื อ น่ � มี ่ ข ้ อ มีู ลื ส่ า คุั ญ โปรด้มีอบเอกสารให์้ ก ั บ เจึ้ า ของสุ ข ภัั ณ ฑ์์
คุ ู ่ มี ื อ น ่ � ป ระกอบด้ ้ ว ย่ข ั � น ตอนการต ิ ด้ ต ั � ง , การด้ ู แ ลืร ั ก ษาแลืะการที่ ่ า คุวามีสะอาด้ส ุ ข ภั ั ณ ฑ์ ์
โปรด้เก็ บ คุู ่ มี ื อ น่ � เ พื � อ เป็ น เอกสารอ้ า งอิ ง ในอนาคุต
ข้ อ สั ง เกต อุ ป กรณ์ ห์ น้ า แปลืนไมี่ ร วมีอยู่ ่ ใ นชุ้ ด้ สุ ข ภัั ณ ฑ์์
ข้ อ สั ง เกต รู ป ภัาพของสุ ข ภัั ณ ฑ์์ ที่ ่ � แ สด้งอยู่ ่ ใ นขั � น ตอนการติ ด้ ตั � ง สุ ข ภัั ณ ฑ์์ อ าจึจึะแตกต่ า งไป
จึากรุ ่ น สุ ข ภัั ณ ฑ์์ ที่ ่ � ที่ ่ า นก่ า ลืั ง ติ ด้ ตั � ง

Before You Begin

CAUTION: Risk of hazardous gases. If the new toilet is not installed
immediately, temporarily place a rag in the closet flange.
CAUTION: Risk of personal injury or product damage. Handle with
care. Product can break, chip, or cause injury if handled carelessly.
CAUTION: Risk of property or product damage. Turn on the water
and allow water to flow through the supply pipe to flush the system of
any debris before connecting fill valve.
Observe all local plumbing and building codes.
¨
Prior to installation, unpack the new product and inspect it for damage.
¨
Return the product to its protective carton until you are ready to install it.
Failure to follow these precautions may result in a poor installation.
¨
If the existing toilet does not have a supply shut-off valve below the tank,
¨
install one before installing the new toilet.
Fixture dimensions are nominal and conform to tolerances established by
¨
Standards TIS,
Kohler Co.
ASME Standards (A112.19.2-2013) and GB 6952-2015
3
.
1258066-X2-A

Advertisement

loading

This manual is also suitable for:

K-28232xK-28232x-430K-28232x-520