Resetting To User Settings; Clearing The Services List - Topfield CRC-1400 User Reference

18 Service Search

3.3 Resetting to user settings

3.4 Clearing the services list

You can reset all data of the digital receiver. Select the Instal-
lation > System Recovery > Factory Setting menu, and then
you get asked for confirmation. With the choice of Yes, the
services list, favourite list and timer list will all be cleared, and
preference options will be reset to the manufacturer's factory
settings.
NOTE
A factory reset will not delete any recorded programmes.
However, you have to search services again after a factory
reset.
You can store your own data including the following:
• Services list
• Favourite lists
• Preference settings
Also you can restore them at any time.
To store your data, select the Installation > System Recovery >
Store System Data menu, then you get asked for confirmation.
If you select Yes, your data will be stored. Whenever you store
your data, they are all overwritten. To restore your data, select
the Installation > System Recovery > Recover System Data
menu, then you get asked for confirmation. With the choice of
Yes, your data will be restored.
If you only want to clear the services list, select Installation >
System Recovery > Reset Service List , then you get asked for
confirmation. With the choice of Yes, the services list will be
cleared. After this, you have to do service search again.