Table of Contents
Advertisement
Universal Remote Control
The universal remote control allows you to operate the most
important functions such as power on/off and volume control
on your television, audio-video receiver, or DVD player. For
the use of buttons, refer to Table A.1. To be able to control the
device, you must adapt the remote control to the device first.
Take the following steps:
1. Turn on the device you want to operate.
2. Point the remote control at the remote sensor on the de-
vice.
3. Hold down the
for two seconds until the light flashes on. For example,
if you want to operate your television with the remote
control, press the
4. Find the manufacturer of the device from the codes list.
5. Enter the three-digits code you have found for your de-
vice and press the
6. If the setting is finished correctly, the light blinks twice
and the device will be turned off. Otherwise, repeat from
the step 2.
If you cannot find a code for your device, do as follows:
Appendix A
£
¢ ¡
and device button simultaneously
OK
£
£
¢ ¡
¢ ¡
and
buttons simultaneously.
OK
TV
£
¢ ¡
button.
OK
71
Advertisement
Table of Contents
