Cisco Craft Works Interface Quick Start Manual page 15

Figure 6 displays the Failed Log window. Click the Close button to go back to the Progress window.
Figure 6 Failed Log Window
Specifying the User Login Script
You can access devices not directly accessible from the CWI workstation through the Scripted Login capability. Table 5 lists the
fields in the Login Script Steps window (see Figure 7).
Table 5 Fields for Login Script Steps Window
Field Description
Wait For Represents the output from the intermediate device that CWI should wait for before sending the data specified
in the corresponding Send.
Send Represents the information that is sent to the device following the proceeding Wait For. You can enter a string
to be sent to connect to the router; for example, telnet term-server 2001. Or you can choose either Scripted
Username or Scripted Password options from the drop-down list. If you choose either Scripted Username
option or Scripted Password option, CWI uses the same scripted username and scripted password that you
specified from the CWI - Login window (see Figure 1).
In addition, you can enter the following special characters in the Send field:
• \n is a new line.
• \r is a carriage return.
• \t is a tab.
• %USERNAME%
1. CWI substitutes with what was entered in the User Name field when you logged in.
1
15