Intended Use; General Safety Rules; Electrical Safety - Ryobi RSH2845T Original Instructions Manual

Hide thumbs Also See for RSH2845T:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
Safety, performance, and dependability have
been given top priority in the design of your
electric silent shredder.

INTENDED USE

The product is designed for reducing organic
garden waste materials such as branches,
twigs, and foliage to small pieces and is for
use outdoors in a stationary position by an
operator standing on the ground. The product
is not intended for non-organic material,
metal, or material which exceeds its maximum
cutting capacity of 45 mm diameter.
The product must be mounted on the stand
provided and must be used with the collection
box provided. It must not be mounted in any
other way than shown in this manual.

GENERAL SAFETY RULES

WARNING
The product is not intended for use by
children or persons with reduced physical,
mental, or sensory capabilities. Young
children should be supervised at all times
by someone other than the operator to
ensure that they do not play near or with the
product.
WARNING
When using the product, basic safety
precautions should be followed to reduce
the risk of fi re, electric shock, and personal
injury. Read all of these safety instructions
carefully before operating the product.
Make sure you are familiar with the controls
and the proper and safe use of the product.
Please keep these instructions safe for later
use.
TRAINING
Become familiar with the user guide before
attempting to operate the product.
Never allow children or people unfamiliar
with these instructions to use the product.
Local regulations may restrict the age of
the operator.
The operator or user of the product is
responsible for accidents or hazards
occurring to other people or their property.
PREPARATION
Do not allow children to operate the
product.
Do not operate the product in the vicinity
of bystanders, especially children and pets.
Wear ear protection and safety glasses at
all times while operating the product.
Always wear protective non-slip footwear
and long trousers. Avoid wearing clothing
that is loose fitting or that has hanging
cords or ties.
Only operate the product in open space
(e.g. not close to a wall or a fixed object)
and on a firm, level surface.
Do not operate the product on a paved
or gravel surface where ejected material
could cause injury.
Before starting the product, check that all
screws, nuts, bolts, and other fasteners
are properly secured and that guards
and collection box are in place. Return to
an authorised service centre to replace
damaged or unreadable labels.
Before use, check the supply and extension
cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect
the cord from the supply immediately. Do
not touch the cord before disconnecting the
supply. Do not use the product if the cord is
damaged or worn.

ELECTRICAL SAFETY

Read these safety instructions thoroughly
before connecting the product to the mains
supply.
Before switching on, make sure that
the voltage of your electricity supply is
the same as that indicated on the rating
plate. The manufacturer recommends you
connect to a power socket protected by an
RCD with a trip of 30 mA.
Connecting it to any other power source
may cause damage.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
If you need to use an extension cord,
ensure it is suitable for outdoor use and
has a current capacity rating sufficient to
supply your product. The extension cord
cable should be marked with either "H05
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
1

Advertisement

Table of Contents
loading

Table of Contents